gmt.conf

Configuration for GMT

Description

The following is a list of the parameters that are user-definable in GMT. The parameter names are always given in UPPER CASE. The parameter values are case-insensitive unless otherwise noted. Theme-independent system defaults are given in brackets [default is value], with units specified for dimensional quantities, while theme-dependent defaults are outlined in the GMT_THEME settings table. Most parameters can be changed by using gmtset, editing a gmt.conf file that can be acquired using gmtdefaults, or setting parameters on-the-fly via the --PARAMETER=VALUE option to any GMT program. However, a few are static and are only read via the gmt.conf file; these are labeled (static). Several parameters take only true or false. It is recommended that users specify the units for distances and lengths by appending c (cm), i (inch), or p (points) when changing parameters using any of these methods. By default, when no unit is specified the value will be assumed to be cm for parameters not related to fonts or pen thicknesses and will be assumed to be points for parameters related to fonts or pen thicknesses. The interpretation of unitless dimensional quantities can be changed using the parameter PROJ_LENGTH_UNIT or specifying US units when building GMT.

Common Specifications

The full explanation for how to specify pens, pattern fills, colors, and fonts can be found in the gmt man page.

THEMATIC SUB-SECTIONS

prefix

COLOR Parameters

COLOR_

DIR Parameters

DIR_

FONT Parameters

FONT_

FORMAT Parameters

FORMAT_

GMT Miscellaneous Parameters

GMT_

I/O Parameters

IO_

MAP Parameters

MAP_

Projection Parameters

PROJ_

PostScript Parameters

PS_

Calendar/Time Parameters

TIME_

COLOR Parameters

COLOR_BACKGROUND

Color used for the background of images (i.e., when z < lowest color table entry) [default is black].

COLOR_FOREGROUND

Color used for the foreground of images (i.e., when z > highest color table entry) [default is white].

COLOR_CPT

Default CPT table when none is selected [default is turbo].

COLOR_HSV_MAX_S

Maximum saturation (0-1) assigned for most positive intensity value [default is 0.1].

COLOR_HSV_MIN_S

Minimum saturation (0-1) assigned for most negative intensity value [default is 1.0].

COLOR_HSV_MAX_V

Maximum value (0-1) assigned for most positive intensity value [default is 1.0].

COLOR_HSV_MIN_V

Minimum value (0-1) assigned for most negative intensity value [default is 0.3].

COLOR_MODEL

Selects in which color space a CPT should be interpolated. By default, color interpolation takes place directly on the RGB values which can produce some unexpected hues, whereas interpolation directly on the HSV values better preserves those hues. The choices are: none (use whatever the COLOR_MODEL setting in the CPT demands), rgb (force interpolation in RGB), hsv (force interpolation in HSV), cmyk (assumes colors are in CMYK but interpolates in RGB) [default is none].

COLOR_NAN

Color used for the non-defined areas of images (i.e., where z = NaN) [default is 128].

COLOR_SET

Default comma-separated list of colors (or a categorical CPT name) for automatic, sequential color assignments [default is #0072BD,#D95319,#EDB120,#7E2F8E,#77AC30,#4DBEEE,#A2142F].

DIR Parameters

DIR_CACHE

Cache directory where we save remote filenames starting in @ (e.g., @hotspots.txt) [default is ~/.gmt/cache].

DIR_DATA

Session data directory. Overrides the value of the environment variable $GMT_DATADIR (see Directory parameters in the CookBook).

DIR_DCW

Path to optional Digital Chart of the World polygon files.

DIR_GSHHG

Path to GSHHG files. Defaults to $GMT_SHAREDIR/coast if empty.

FONT Parameters

FONT

Sets the default for all fonts, except FONT_LOGO. This setting is not included in the gmt.conf file.

FONT_ANNOT

Sets both FONT_ANNOT_PRIMARY and FONT_ANNOT_SECONDARY to the value specified. This setting is not included in the gmt.conf file.

FONT_ANNOT_PRIMARY

Font used for primary annotations, etc [default is theme dependent]. When + is prepended, scale fonts, offsets and tick-lengths relative to FONT_ANNOT_PRIMARY. Choose auto for automatic scaling with plot size.

FONT_ANNOT_SECONDARY

Font to use for time axis secondary annotations [default is theme dependent] Choose auto for automatic scaling with plot size.

FONT_HEADING

Font to use when plotting headings above subplots [default is theme dependent]. Choose auto for automatic scaling with plot size.

FONT_LABEL

Font to use when plotting labels below axes [default is theme dependent]. Choose auto for automatic scaling with plot size.

Font to use for text plotted as part of the GMT time logo [theme dependent]. Choose auto for automatic scaling with plot size.

FONT_SUBTITLE

Font to use when plotting titles over graphs that involve a subtitle [default is theme dependent]. Choose auto for automatic scaling with plot size.

FONT_TAG

Font to use for subplot panel tags such as a), ii) [default is theme dependent]. Choose auto for automatic scaling with plot size.

FONT_TITLE

Font to use when plotting titles over graphs [default is theme dependent]. Choose auto for automatic scaling with plot size.

FORMAT Parameters

FORMAT_CLOCK_IN

Formatting template that indicates how an input clock string is formatted. This template is then used to guide the reading of clock strings in data fields. To properly decode 12-hour clocks, append am or pm (or upper case) to match your data records. As examples, try hh:mm, hh:mm:ssAM, etc. [default is hh:mm:ss].

FORMAT_CLOCK_MAP

Formatting template that indicates how an output clock string is to be plotted. This template is then used to guide the formatting of clock strings in plot annotations. See FORMAT_CLOCK_OUT for details. [default is hh:mm:ss].

FORMAT_CLOCK_OUT

Formatting template that indicates how an output clock string is to be formatted. This template is then used to guide the writing of clock strings in data fields. To use a floating point format for the smallest unit (e.g., seconds), append .xxx, where the number of x indicates the desired precision. If no floating point is indicated then the smallest specified unit will be rounded off to nearest integer. For 12-hour clocks, append am, AM, a.m., or A.M. (GMT will replace a|A with p|P for pm). If your template starts with a leading hyphen (-) then each integer item (y,m,d) will be printed without leading zeros (default uses fixed width formats). As examples, try hh:mm, hh.mm.ss, hh:mm:ss.xxxx, hha.m., etc. [default is hh:mm:ss]. If the format is simply - then no clock is output and the ISO T divider between date and clock is omitted. Note: When high-precision time-series are written to ASCII output the default format may not be adequate. Many modules automatically handle this by extending the format, but you should be alert of unusual situations where data may appear truncated to nearest second.

FORMAT_DATE_IN

Formatting template that indicates how an input date string is formatted. This template is then used to guide the reading of date strings in data fields. You may specify either Gregorian calendar format or ISO week calendar format. Gregorian calendar: Use any combination of yyyy (or yy for 2-digit years; if so see TIME_Y2K_OFFSET_YEAR), mm (or o for abbreviated month name in the current time language), and dd, with or without delimiters. For day-of-year data, use jjj instead of mm and/or dd. Examples can be ddmmyyyy, yy-mm-dd, dd-o-yyyy, yyyy/dd/mm, yyyy-jjj, etc. ISO Calendar: Expected template is yyyy[-]W[-]ww[-]d, where ww is ISO week and d is ISO week day. Either template must be consistent, e.g., you cannot specify months if you do not specify years. Examples are yyyyWwwd, yyyy-Www, etc. [default is yyyy-mm-dd].

FORMAT_DATE_MAP

Formatting template that indicates how an output date string is to be plotted. This template is then used to guide the plotting of date strings in data fields. See FORMAT_DATE_OUT for details. In addition, you may use a single o instead of mm (to plot month name) and u instead of W[-]ww to plot “Week ##”. Both of these text strings will be affected by the GMT_LANGUAGE, FORMAT_TIME_PRIMARY_MAP and FORMAT_TIME_SECONDARY_MAP setting. [default is yyyy-mm-dd].

FORMAT_DATE_OUT

Formatting template that indicates how an output date string is to be formatted. This template is then used to guide the writing of date strings in data fields. You may specify either Gregorian calendar format or ISO week calendar format. Gregorian calendar: Use any combination of yyyy (or yy for 2-digit years; if so see TIME_Y2K_OFFSET_YEAR), mm (or o for abbreviated month name in the current time language), and dd, with or without delimiters. For day-of-year data, use jjj instead of mm and/or dd. As examples, try yy/mm/dd, yyyy=jjj, dd-o-yyyy, dd-mm-yy, yy-mm, etc. ISO Calendar: Expected template is yyyy[-]W[-]ww[-]d, where ww is ISO week and d is ISO week day. Either template must be consistent, e.g., you cannot specify months if you do not specify years. As examples, try yyyyWww, yy-W-ww-d, etc. If your template starts with a leading hyphen (-) then each integer item (y,m,d) will be printed without leading zeros (default uses fixed width formats) [default is yyyy-mm-dd]. If the format is simply - then no date is output and the ISO T divider between date and clock is omitted.

FORMAT_GEO_MAP

Formatting template that indicates how an output geographical coordinate is to be plotted. This template is then used to guide the plotting of geographical coordinates in data fields. See FORMAT_GEO_OUT for details. In addition, you can append A which plots the absolute value of the coordinate. Not all items may be plotted as this depends on the annotation interval. [default is theme dependent].

FORMAT_GEO_OUT

Formatting template that indicates how an output geographical coordinate is to be formatted. This template is then used to guide the writing of geographical coordinates in data fields. The template is in general of the form [±]D or [±]ddd[:mm[:ss]][.xxx] [default is D]. By default, longitudes will be reported in the range [-180,180]. The various terms have the following purpose:

Term

Purpose

D

Use FORMAT_FLOAT_OUT for floating point degrees [default]

+D

Output longitude in the range [0,360]

-D

Output longitude in the range [-360,0]

ddd

Fixed format integer degrees

:

Delimiter used

mm

Fixed format integer arc minutes

ss

Fixed format integer arc seconds

.xxx

Floating fraction of previous integer field, fixed width

F

Encode sign using WESN suffix

G

Same as F but with a leading space before suffix
FORMAT_FLOAT_MAP

Format (C language printf syntax, see FORMAT_FLOAT_OUT) to be used when plotting double precision floating point numbers along plot frames and contours. For geographic coordinates, see FORMAT_GEO_MAP. [default is %.12g].

FORMAT_FLOAT_OUT

Format (C language printf syntax) to be used when printing double precision floating point numbers to output files. For geographic coordinates, see FORMAT_GEO_OUT. [default is %.12g]. To give some columns a separate format, supply one or more comma-separated cols:format specifications, where cols can be specific columns (e.g., 5 for 6th since 0 is the first) or a range of columns (e.g.,3-7). The last specification without column information will override the format for all other columns. Alternatively, you canlist N space-separated formats and these apply to the first N columns.

The printf syntax is %[minimum width].[precision]type, where type may be f, e, E, g or G. The default is %.12g, i.e. no minimum width and 12 digit precision.

See table below for examples. Input is pi (3.14159265359).

Format

Output

%.12g

3.14159265359

%.2f

3.14

%8.4f

3.1416

%08.2f

003.1416

%.5f

3.14159
FORMAT_TIME_MAP

Sets both FORMAT_TIME_PRIMARY_MAP and FORMAT_TIME_SECONDARY_MAP to the value specified. This setting is not included in the gmt.conf file.

FORMAT_TIME_PRIMARY_MAP

Controls how primary month-, week-, and weekday-names are formatted. Choose among full, abbreviated, and character. If the leading f, a, or c are replaced with F, A, and C the entire annotation will be in upper case [default is full].

FORMAT_TIME_SECONDARY_MAP

Controls how secondary month-, week-, and weekday-names are formatted. Choose among full, abbreviated, and character. If the leading f, a, or c are replaced with F, A, and C the entire annotation will be in upper case [default is full].

FORMAT_TIME_STAMP

Defines the format of the time information in the UNIX time stamp. This format is parsed by the C function strftime, so that virtually any text can be used (even not containing any time information) [default is %Y %b %d %H:%M:%S].

GMT Miscellaneous Parameters

GMT_COMPATIBILITY

Determines if the current GMT version should be able to parse command-line options for a prior major release. Specify the major release version number, e.g., 4-6. If 4 is set we will parse obsolete GMT 4 options and issue warnings; if 5 is set then parsing GMT 4 only syntax will result in errors [default is 4]; likewise for 6: obsolete syntax from early GMT 5 will be considered errors.

GMT_DATA_SERVER

Name (or URL) of a GMT data server [default is oceania]. Please set to the data server closest to your location for faster data download. See Data Server Mirrors for a list of the currently available mirrors.

GMT_DATA_SERVER_LIMIT

Upper limit on the size of remote file to download [default is unlimited]. Give the maximum file size in bytes, or append k, m, or g for kilo-, mega-, or giga-bytes.

GMT_DATA_UPDATE_INTERVAL

Specifies how often we update the local catalog of data available on the remote server and pruning expired data sets [default is 1d]. Allowable time units are d (days), w (week), o (month, here 30 days). To turn off periodic updates entirely, specify interval as off, never, infinity, or just 0.

GMT_EXPORT_TYPE

This setting is only used by external interfaces and controls the data type used for table entries. Choose from double, single, [u]long, [u]int, [u]short, and [u]char [default is double].

GMT_EXTRAPOLATE_VAL

Determines what to do if extrapolating beyond the data domain. Choose among NaN, extrap or extrapval,value. In the first case return NaN for any element of x that is outside range. Second case lets the selected algorithm compute the extrapolation values. Third case sets the extrapolation values to the constant value passed in value (this value must off course be numeric) [default is NaN].

GMT_CUSTOM_LIBS

Comma-separated list of GMT-compliant shared libraries that extend the capability of GMT with additional custom modules [default is none]. Alternatively, provide a directory name, that MUST end with a slash (or back slash), to use all shared libraries in that directory. On Windows, if the dir name is made up only of a single slash (‘/’) search inside a subdirectory called gmt_plugins of the directory that contains the gmt executable. See the API documentation for how to build your own shared modules.

GMT_FFT

Determines which Fast Fourier Transform (FFT) should be used among those that have been configured during installation. Choose from auto (pick the most suitable for the task among available algorithms), fftw[,planner_flag] (The Fastest Fourier Transform in the West), accelerate (Use the Accelerate Framework under OS X; Note, that the number of samples to be processed must be a base 2 exponent), kiss, (Kiss FFT), brenner Brenner Legacy FFT [default is auto]. FFTW can “learn” how to optimally compute Fourier transforms on the current hardware and OS by computing several FFTs and measuring their execution time. This so gained “Wisdom” will be stored in and reloaded from the file fftw_wisdom_<hostname> in $GMT_USERDIR or, if $GMT_USERDIR is not writable, in the current directory. To use this feature append planner_flag, which can be one of measure, patient, exhaustive and estimate which pick a (probably sub-optimal) plan quickly [default is estimate]. See FFTW reference for details. Note: If you need a single transform of a given size only, the one-time cost of the smart planner becomes significant. In that case, stick to the default planner, estimate, based on heuristics.

GMT_GRAPHICS_DPU

Default target dots-per-unit for images when a remote gridded data set is requested without specifyin a resolution (e.g., @earth_relief). Append “i” to indicate the DPU is dots-per-inches and “c” for dots-per-cm. [default is 300i].

GMT_GRAPHICS_FORMAT

Default graphics format in modern mode [default is pdf].

GMT_HISTORY

Passes the history of past common command options via the gmt.history file. The different values for this setting are: true, readonly, false, to either read and write to the gmt.history file, only read, or not use the file at all [default is true].

GMT_INTERPOLANT

Determines if linear (linear), Akima’s spline (akima), natural cubic spline (cubic) or no interpolation (none) should be used for 1-D interpolations in various programs [default is akima].

GMT_LANGUAGE

Language to use when plotting calendar and map items such as months and days, map annotations and cardinal points. Select from:

  • CN1: Simplified Chinese

  • CN2: Traditional Chinese

  • DE: German

  • DK: Danish

  • EH: Basque

  • ES: Spanish

  • FI: Finnish

  • FR: French

  • GR: Greek

  • HI: Hawaiian

  • HU: Hungarian

  • IE: Irish

  • IL: Hebrew

  • IS: Icelandic

  • IT: Italian

  • JP: Japanese

  • KR: Korean

  • NL: Dutch

  • NO: Norwegian

  • PL: Polish

  • PT: Portuguese

  • RU: Russian

  • SE: Swedish

  • SG: Scottish Gaelic

  • TO: Tongan

  • TR: Turkish

  • UK: British English

  • US: US English

If your language is not supported, please examine the $GMT_SHAREDIR/localization/gmt_us.locale file and make a similar file. Please submit it to the GMT Developers for official inclusion. Custom language files can be placed in directories $GMT_SHAREDIR/localization or ~/.gmt. Note: Some of these languages may require you to also change the PS_CHAR_ENCODING setting.

GMT_MAX_CORES

Sets the upper limit on the number of cores any multi-threaded module might use (whether -x is selected or not) [default is 0 (i.e., unlimited)].

GMT_THEME

Override GMT default settings with those of the selected theme. Choose from classic [Default for classic mode], modern [Default for modern mode], and minimal. You can also create and use your own themes by compiling files of desired settings and place them in your GMT user themes directory (usually ~/.gmt/themes) and name them theme.conf. See the theme settings table for parameters associated with each theme.

GMT_TRIANGULATE

Determines if we use the Watson or Shewchuk algorithm (if configured during installation) for triangulation. Note that Shewchuk is required for operations involving Voronoi constructions [default is Watson].

GMT_VERBOSE

(-V) Determines the level of verbosity used by GMT programs. Choose among 7 levels; each level adds to the verbosity of the lower levels: quiet, errors, warnings, timings (for slow algorithms only), information, compatibility warnings, and debugging messages [default is w].

I/O Parameters

IO_COL_SEPARATOR

This setting determines what character will separate ASCII output data columns written by GMT. Choose from tab, space, comma, and none [default is tab].

IO_FIRST_HEADER

This setting determines if the first segment header is written when there is only a single segment (for multiple segment it must be written). By default, such single-segment headers are only written if the header has contents. Choose from always, never, or maybe [default is maybe].

IO_GRIDFILE_FORMAT

Default file format for grids, with optional scale, offset and invalid value, written as ff[+sscale][+ooffset][+ninvalid]. The 2-letter format indicator can be one of [abcegnrs][bsifd]. See grdconvert and Section Grid file format specifications of the GMT Technical Reference and Cookbook for more information. You may the scale as a for auto-adjusting the scale and/or offset of packed integer grids (=ID+sa is a shorthand for =ID+sa+oa). When invalid is omitted the appropriate value for the given format is used (NaN or largest negative) [default is nf].

IO_GRIDFILE_SHORTHAND

If true, all grid file names are examined to see if they use the file extension shorthand discussed in Section Grid file format specifications of the GMT Technical Reference and Cookbook. If false, no filename expansion is done [default is false].

IO_HEADER

(-h) Specifies whether input/output ASCII files have header record(s) or not [default is false].

IO_HEADER_MARKER

Give a string from which any character will indicate a header record in an incoming ASCII data table if found in the first position [default is #%!;”’]. If another marker should be used for output than the first character in the list, then append a single character for the output header record marker. The two sets must be separated by a comma. Note: A maximum of 7 input markers can be specified.

IO_LONLAT_TOGGLE

(-:) Set if the first two columns of input and output files contain (latitude,longitude) or (y,x) rather than the expected (longitude,latitude) or (x,y). false means we have (x,y) both on input and output. true means both input and output should be (y,x). IN means only input has (y,x), while OUT means only output should be (y,x) [default is false].

IO_N_HEADER_RECS

Specifies how many header records to expect if -h is used [default is 0]. Note: This will skip the specified number of records regardless of what they are. Since any records starting with # is automatically considered a header you will only specify a non-zero number in order to skip headers that do not conform to that convention.

IO_NAN_RECORDS

Determines what happens when input records containing NaNs for x or y (and in some cases z) are read. This may happen, for instance, when there is text or other junk present instead of data coordinates, and the conversion to a data value fails and yields a NaN. Choose between skip, which will report how many bad records were skipped, and pass, which will quietly pass these records on to the calling programs [default is pass]. For most programs this will result in output records with NaNs as well, but some will interpret these NaN records to indicate gaps in a series; programs may then use that information to detect segmentation (if applicable).

IO_NC4_CHUNK_SIZE

Sets the default chunk size for the vertical (lat, y) and horizontal (lon, x) dimensions of the z variable. Very large chunk sizes and sizes smaller than 128 should be avoided because they can lead to unexpectedly bad performance. Note that a chunk of a single precision floating point variable of size 2896x2896 completely fills the chunk cache of 32 MiB. Specify the chunk size for each dimension separated by a comma, or auto for optimally chosen chunk sizes in the range [128,256). Setting IO_NC4_CHUNK_SIZE will produce netCDF version 4 files, which can only be read with the netCDF 4 library, unless all dimensions are less than 128 or classic is specified for classic netCDF [default is auto]

IO_NC4_DEFLATION_LEVEL

Sets the compression level for netCDF4 files upon output. Values allowed are integers from 0 (no compression) to 9 (maximum compression). Enabling a low compression level can dramatically improve performance and reduce the size of certain data. While higher compression levels further reduce the data size, they do so at the cost of extra processing time. This parameter does not apply to classic netCDF files [default is 3].

IO_SEGMENT_BINARY

Determines how binary data records with all values set to NaN are interpreted. Such records are considered to be encoded segment headers in binary files provided the number of columns equals or exceeds the current setting of IO_SEGMENT_BINARY [default is 2]. Specify 0 or off to deactivate the segment header determination.

IO_SEGMENT_MARKER

This holds the character we expect to indicate a segment header in an incoming ASCII data or text table [default is >]. If this marker should be different for output then append another character for the output segment marker. The two characters must be separated by a comma. Two marker characters have special meaning: B means “blank line” and will treat blank lines as initiating a new segment, whereas N means “NaN record” and will treat records with all NaNs as initiating a new segment. If you choose B or N for the output marker then the normal GMT segment header is replaced by a blank or NaN record, respectively, and no segment header information is written. To use B or N as regular segment markers you must escape them with a leading backslash.

MAP Parameters

MAP_ANNOT_MIN_ANGLE

If the angle between the map boundary and the annotation baseline is less than this minimum value (in degrees), the annotation is not plotted (this may occur for certain oblique projections). Give a value in the range [0,90] [default is 20].

MAP_ANNOT_MIN_SPACING

If an annotation would be plotted less than this minimum distance from its closest neighbor, the annotation is not plotted (this may occur for certain oblique or polar projections) [default is theme dependent]. Choose auto for automatic scaling with plot size.

MAP_ANNOT_OBLIQUE

This argument is a comma-separated list of up to seven keywords: separate means longitudes will be annotated on the lower and upper boundaries only, and latitudes will be annotated on the left and right boundaries only; anywhere means annotations will occur wherever an imaginary gridline crosses the map boundaries; lon_horizontal means longitude annotations will be plotted horizontally; lat_horizontal means latitude annotations will be plotted horizontally; tick_extend means tick-marks are extended so the distance from the tip of the oblique tick to the map frame equals the specified tick length; tick_normal means tick-marks will be drawn normal to the border regardless of gridline angle; lat_parallel means latitude annotations will be plotted parallel to the border [default is anywhere].

MAP_ANNOT_OFFSET

Sets both MAP_ANNOT_OFFSET_PRIMARY and MAP_ANNOT_OFFSET_SECONDARY to the value specified. This setting is not included in the gmt.conf file.

MAP_ANNOT_OFFSET_PRIMARY

Distance from end of tick-mark to start of annotation [default is theme dependent]. Choose auto for automatic scaling with plot size.

MAP_ANNOT_OFFSET_SECONDARY

Distance from base of primary annotation to the top of the secondary annotation (Only applies to time axes with both primary and secondary annotations) [default is theme dependent]. Choose auto for automatic scaling with plot size.

MAP_ANNOT_ORTHO

Determines which axes will get their annotations (for Cartesian projections) plotted orthogonally to the axes. Combine any w, e, s, n, z (uppercase allowed as well) [default is we] (if nothing specified). Note that this setting can be overridden via the +a modifier in -B.

MAP_DEFAULT_PEN

Sets the default of all pens related to -W options. Prepend + to overrule the color of the parameters MAP_GRID_PEN_PRIMARY, MAP_GRID_PEN_SECONDARY, MAP_FRAME_PEN, MAP_TICK_PEN_PRIMARY, and MAP_TICK_PEN_SECONDARY by the color of MAP_DEFAULT_PEN [default is 0.25p,black].

MAP_DEGREE_SYMBOL

Determines what symbol is used to plot the degree symbol on geographic map annotations. Choose between ring, degree, colon, or none [default is degree].

MAP_FRAME_AXES

Sets which axes to draw and annotate. Combine any uppercase W, E, S, N, Z to draw and annotate west, east, south, north and/or vertical (perspective view only) axis. Use lower case to draw the axis only, but not annotate. To just draw an axis without annotation and ticks you can use the l(eft), r(ight), b(ottom), t(op) and (for 3-D) u(p) codes. Add an optional +b to draw a cube of axes in perspective view. Choose auto for automatic selection [default is theme dependent].

MAP_FRAME_PEN

Pen attributes used to draw plain map frame [default is theme dependent]. Choose auto for automatic scaling with plot size.

MAP_FRAME_PERCENT

Percentage of the fancy frame width to use for the internal checkerboard frame lines [default is 100].

MAP_FRAME_TYPE

Choose between inside, plain and fancy (thick boundary, alternating black/white frame; append -rounded for rounded corners) [default is theme dependent]. For some map projections (e.g., Oblique Mercator), plain is the only option even if fancy is set as default. In general, fancy only applies to situations where the projected x and y directions parallel the longitude and latitude directions (e.g., rectangular projections, polar projections). For situations where all boundary ticks and annotations must be inside the maps (e.g., for preparing geotiffs), chose inside. Finally, for Cartesian plots you can also choose graph, which adds a vector to the end of each axis. This works best when you reduce the number of axes plotted to one per dimension. By default, the vector tip extends the length of each axis by 7.5%. Alternatively, append ,length, where the optional unit may be % (then length is the alternate extension in percent) or one of c, i, or p (then length is the absolute extension of the axis to the start of the vector base instead). The vector stem is set to match MAP_FRAME_WIDTH, while the vector head length and width are 10 and 5 times this width, respectively. You may control its shape via MAP_VECTOR_SHAPE.

Here is an example showing the appearance of different MAP_FRAME_TYPE settings.

gmt begin GMT_map_frame_type
  gmt set GMT_THEME cookbook
  gmt set FONT_TITLE 18p
  gmt subplot begin 1x5 -Fs3.5c/3.5c -M0.4c -R0/10/0/10
    gmt basemap -JM? -Baf -BWSen+t"fancy" -c --MAP_FRAME_TYPE=fancy
    gmt basemap -JM? -Baf -BWSen+t"fancy+" -c --MAP_FRAME_TYPE=fancy+
    gmt basemap -JM? -Baf -BWSen+t"plain" -c --MAP_FRAME_TYPE=plain
    gmt basemap -JX? -Baf -BWSen+t"inside" -c --MAP_FRAME_TYPE=inside
    gmt basemap -JX? -Baf -BWS+t"graph" -c --MAP_FRAME_TYPE=graph
  gmt subplot end
gmt end show
_images/GMT_map_frame_type.png

Appearance of different MAP_FRAME_TYPE settings

MAP_FRAME_WIDTH

Width (> 0) of map borders for fancy map frame [default is theme dependent]. Note: For fancy frames, MAP_FRAME_PEN is automatically set to 0.1 times the MAP_FRAME_WIDTH setting. Choose auto for automatic scaling with plot size.

MAP_GRID_CROSS_SIZE

Sets both MAP_GRID_CROSS_SIZE_PRIMARY and MAP_GRID_CROSS_SIZE_SECONDARY to the value specified. This setting is not included in the gmt.conf file.

MAP_GRID_CROSS_SIZE_PRIMARY

Size of grid cross at lon-lat intersections. 0 means draw continuous gridlines instead. A nonzero size will draw a symmetric grid cross. Signed sizes have special meaning and imply grid line ticks that embellish an already drawn set of gridlines: A negative size will only draw ticks away from Equator and Greenwich, while a positive size will draw symmetric ticks [default is 0p].

MAP_GRID_CROSS_SIZE_SECONDARY

Size of grid cross at secondary lon-lat intersections. 0 means draw continuous gridlines instead. A nonzero size will draw a symmetric grid cross. Signed sizes have special meaning and imply grid line ticks that embellish an already drawn set of gridlines: A negative size will only draw ticks away from Equator and Greenwich, while a positive size will draw symmetric ticks [default is 0p].

MAP_GRID_PEN

Sets both MAP_GRID_PEN_PRIMARY and MAP_GRID_PEN_SECONDARY to the value specified. This setting is not include in the gmt.conf file.

MAP_GRID_PEN_PRIMARY

Pen attributes used to draw primary grid lines in dpi units or points (append p) [default is theme dependent]. Choose auto for automatic scaling with plot size.

MAP_GRID_PEN_SECONDARY

Pen attributes used to draw secondary grid lines in dpi units or points (append p) [default is theme dependent]. Choose auto for automatic scaling with plot size.

MAP_HEADING_OFFSET

Distance from top of subplot panel titles to the base of the heading [default is theme dependent]. Choose auto for automatic scaling with plot size.

MAP_LABEL_MODE

Determines from where the label offset is measured: Choose annot to mean the distance from the end of the annotation or axis to mean the distance from the axis. To set separate modes for the x and y axes, separate modes by a slash [default is annot/annot]. Choose axis if you need to align multiple axes labels across many rows or columns.

MAP_LABEL_OFFSET

Distance from base of axis annotations to the top of the axis label [default is theme dependent]. Choose auto for automatic scaling with plot size. To set different offsets for the x and y axes, separate distances by a slash (e.g., 8p/12p for 8p offset for the x-axis and 12p offset for the y-axis)

MAP_LINE_STEP

Determines the maximum length (> 0) of individual straight line-segments when drawing arcuate lines [default is 0.75p]

(-U) Specifies if a GMT logo with system timestamp should be plotted at the lower left corner of the plot [default is false].

MAP_LOGO_POS

(-U) Sets the justification and the position of the logo/timestamp box relative to the current plot’s lower left corner (i.e., map origin) [default is BL/-54p/-54p].

MAP_ORIGIN_X

(-X) Sets the x-coordinate of the origin on the paper for a new plot [default is 72p]. For an overlay, the default offset is 0.

MAP_ORIGIN_Y

(-Y) Sets the y-coordinate of the origin on the paper for a new plot [default is 72p]. For an overlay, the default offset is 0.

MAP_POLAR_CAP

Controls the appearance of gridlines near the poles for all azimuthal projections and a few others in which the geographic poles are plotted as points (Lambert Conic, Oblique and Transverse Mercator, UTM, Hammer, Mollweide, Sinusoidal and van der Grinten). Specify either none (in which case there is no special handling) or pc_lat/pc_dlon. In that case, normal gridlines are only drawn between the latitudes -pc_lat/+pc_lat, and above those latitudes the gridlines are spaced at the (presumably coarser) pc_dlon interval; the two domains are separated by a small circle drawn at the pc_lat latitude. Alternatively, give auto to determine a pc_lat suitable for your region [default is theme dependent]. Note for r-theta (polar) projection where r = 0 is at the center of the plot the meaning of the cap is reversed, i.e., 85/90 will draw a r = 5 radius circle at the center of the map with less frequent radial lines there.

MAP_SCALE_HEIGHT

Sets the height (> 0) on the map of the map scale bars drawn by various programs [default is 5p].

MAP_TICK_LENGTH

Sets both MAP_TICK_LENGTH_PRIMARY and MAP_TICK_LENGTH_SECONDARY to the value specified. This setting is not included in the gmt.conf file.

MAP_TICK_LENGTH_PRIMARY

The length of a primary major/minor tick-marks [default is theme dependent]. If only the first value is set, the second is assumed to be 50% of the first. Choose auto for automatic scaling with plot size.

MAP_TICK_LENGTH_SECONDARY

The length of a secondary major/minor tick-marks [default is theme dependent]. If only the first value is set, the second is assumed to be 25% of the first. Choose auto for automatic scaling with plot size.

MAP_TICK_PEN

Sets both MAP_TICK_PEN_PRIMARY and MAP_TICK_PEN_SECONDARY to the value specified. This setting is not included in the gmt.conf file.

MAP_TICK_PEN_PRIMARY

Pen attributes to be used for primary tick-marks in dpi units or points (append p) [default is theme dependent]. Choose auto for automatic scaling with plot size.

MAP_TICK_PEN_SECONDARY

Pen attributes to be used for secondary tick-marks in dpi units or points (append p) [default is theme dependent]. Choose auto for automatic scaling with plot size.

MAP_TITLE_OFFSET

Distance from top of axis annotations (or axis label, if present) to base of plot title [default is theme dependent]. Choose auto for automatic scaling with plot size.

MAP_VECTOR_SHAPE

Determines the shape of the head of a vector. Normally (i.e., for vector_shape = 0), the head will be triangular, but can be changed to an arrow (1) or an open V (2). Intermediate settings give something in between. Negative values (up to -2) are allowed as well [default is theme dependent].

Projection Parameters

PROJ_AUX_LATITUDE

Only applies when geodesics are approximated by great circle distances on an equivalent sphere. Select from authalic, geocentric, conformal, meridional, parametric, or none (i.e., geodetic) [default is authalic]. When not none we convert any latitude used in the great circle calculation to the chosen auxiliary latitude before doing the distance calculation. See also PROJ_MEAN_RADIUS.

PROJ_ELLIPSOID

The (case sensitive) name of the ellipsoid used for the map projections [WGS-84]. Choose among:

  • Airy: Applies to Great Britain (1830)

  • Airy-Ireland: Applies to Ireland in 1965 (1830)

  • Andrae: Applies to Denmark and Iceland (1876)

  • APL4.9: Appl. Physics (1965)

  • ATS77: Average Terrestrial System, Canada Maritime provinces (1977)

  • Australian: Applies to Australia (1965)

  • Bessel: Applies to Central Europe, Chile, Indonesia (1841)

  • Bessel-Namibia: Same as Bessel-Schwazeck (1841)

  • Bessel-NGO1948: Modified Bessel for NGO 1948 (1841)

  • Bessel-Schwazeck: Applies to Namibia (1841)

  • Clarke-1858: Clarke’s early ellipsoid (1858)

  • Clarke-1866: Applies to North America, the Philippines (1866)

  • Clarke-1866-Michigan: Modified Clarke-1866 for Michigan (1866)

  • Clarke-1880: Applies to most of Africa, France (1880)

  • Clarke-1880-Arc1950: Modified Clarke-1880 for Arc 1950 (1880)

  • Clarke-1880-IGN: Modified Clarke-1880 for IGN (1880)

  • Clarke-1880-Jamaica: Modified Clarke-1880 for Jamaica (1880)

  • Clarke-1880-Merchich: Modified Clarke-1880 for Merchich (1880)

  • Clarke-1880-Palestine: Modified Clarke-1880 for Palestine (1880)

  • CPM: Comm. des Poids et Mesures, France (1799)

  • Delambre: Applies to Belgium (1810)

  • Engelis: Goddard Earth Models (1985)

  • Everest-1830: India, Burma, Pakistan, Afghanistan, Thailand (1830)

  • Everest-1830-Kalianpur: Modified Everest for Kalianpur (1956) (1830)

  • Everest-1830-Kertau: Modified Everest for Kertau, Malaysia & Singapore (1830)

  • Everest-1830-Pakistan: Modified Everest for Pakistan (1830)

  • Everest-1830-Timbalai: Modified Everest for Timbalai, Sabah Sarawak (1830)

  • Fischer-1960: Used by NASA for Mercury program (1960)

  • Fischer-1960-SouthAsia: Same as Modified-Fischer-1960 (1960)

  • Fischer-1968: Used by NASA for Mercury program (1968)

  • FlatEarth: As Sphere, but implies fast “Flat Earth” distance calculations (1984)

  • GRS-67: International Geodetic Reference System (1967)

  • GRS-80: International Geodetic Reference System (1980)

  • Hayford-1909: Same as the International 1924 (1909)

  • Helmert-1906: Applies to Egypt (1906)

  • Hough: Applies to the Marshall Islands (1960)

  • Hughes-1980: Hughes Aircraft Company for DMSP SSM/I grid products (1980)

  • IAG-75: International Association of Geodesy (1975)

  • Indonesian: Applies to Indonesia (1974)

  • International-1924: Worldwide use (1924)

  • International-1967: Worldwide use (1967)

  • Kaula: From satellite tracking (1961)

  • Krassovsky: Used in the (now former) Soviet Union (1940)

  • Lerch: For geoid modeling (1979)

  • Maupertius: Really old ellipsoid used in France (1738)

  • Mercury-1960: Same as Fischer-1960 (1960)

  • MERIT-83: United States Naval Observatory (1983)

  • Modified-Airy: Same as Airy-Ireland (1830)

  • Modified-Fischer-1960: Applies to Singapore (1960)

  • Modified-Mercury-1968: Same as Fischer-1968 (1968)

  • NWL-10D: Naval Weapons Lab (Same as WGS-72) (1972)

  • NWL-9D: Naval Weapons Lab (Same as WGS-66) (1966)

  • OSU86F: Ohio State University (1986)

  • OSU91A: Ohio State University (1991)

  • Plessis: Old ellipsoid used in France (1817)

  • SGS-85: Soviet Geodetic System (1985)

  • South-American: Applies to South America (1969)

  • Sphere: The mean radius in WGS-84 (for spherical/plate tectonics applications) (1984)

  • Struve: Friedrich Georg Wilhelm Struve (1860)

  • TOPEX: Used commonly for altimetry (1990)

  • Walbeck: First least squares solution by Finnish astronomer (1819)

  • War-Office: Developed by G. T. McCaw (1926)

  • WGS-60: World Geodetic System (1960)

  • WGS-66: World Geodetic System (1966)

  • WGS-72: World Geodetic System (1972)

  • WGS-84: World Geodetic System [Default] (1984)

  • Web-Mercator: Spherical Mercator with WGS-84 radius (1984)

  • Moon: Moon (IAU2000) (2000)

  • Mercury: Mercury (IAU2000) (2000)

  • Venus: Venus (IAU2000) (2000)

  • Mars: Mars (IAU2000) (2000)

  • Jupiter: Jupiter (IAU2000) (2000)

  • Saturn: Saturn (IAU2000) (2000)

  • Uranus: Uranus (IAU2000) (2000)

  • Neptune: Neptune (IAU2000) (2000)

  • Pluto: Pluto (IAU2000) (2000)

Note that for some global projections, GMT may use a spherical approximation of the ellipsoid chosen, setting the flattening to zero, and using a mean radius. A warning will be given when this happens. If a different ellipsoid name than those mentioned here is given, GMT will attempt to parse the name to extract the semi-major axis (a in m) and the flattening. Formats allowed are:

a implies a zero flattening

a,inv_f where inv_f is the inverse flattening

a,b=b where b is the semi-minor axis (in m)

a,f=f where f is the flattening

This way a custom ellipsoid (e.g., those used for other planets) may be used. Further note that coordinate transformations in mapproject can also specify specific datums; see the mapproject man page for further details and how to view ellipsoid and datum parameters.

PROJ_GEODESIC

Selects the algorithm to use for geodesic calculations. Choose between Vincenty, Rudoe, or Andoyer. The Andoyer algorithm is only approximate (to within a few tens of meters) but is up to 5 times faster. The Rudoe is given for legacy purposes. [default is Vincenty (accurate to about 0.5 mm)].

PROJ_LENGTH_UNIT

Sets the default unit length. Choose between cm, inch, or point [default is c (or i)]. Note: In GMT, one point is defined as 1/72 inch (the PostScript definition), while it is often defined as 1/72.27 inch in the typesetting industry. There is no universal definition.)

PROJ_MEAN_RADIUS

Applies when geodesics are approximated by great circle distances on an equivalent sphere or when surface areas are computed. Select from mean (R_1), authalic (R_2), volumetric (R_3), meridional, or quadratic [default is authalic].

PROJ_SCALE_FACTOR

Changes the default map scale factor used for the Polar Stereographic [default is 0.9996], UTM [default is 0.9996], and Transverse Mercator [default is 1] projections in order to minimize areal distortion. Provide a new scale-factor or leave as default.

PostScript Parameters

PS_CHAR_ENCODING

(static) Names the eight bit character set being used for text in files and in command line parameters. This allows GMT to ensure that the PostScript output generates the correct characters on the plot. Choose from Standard, Standard+, ISOLatin1, ISOLatin1+, and ISO-8859-x (where x is in the ranges 1-11 or 13-16). See Appendix F for details [default is ISOLatin1+ (or Standard+)]. Note: Normally the character set is written as part of the PostScript header. If you need to switch to another character set for a later overlay then you must use --PS_CHAR_ENCODING=encoding on the command line and not via gmt gmtset. Finally, note 6, 8, and 11 do not work with standard fonts.

PS_COLOR_MODEL

Determines whether PostScript output should use RGB, HSV, CMYK, or GRAY when specifying color [default is rgb]. Note if HSV is selected it does not apply to images which in that case uses RGB. When selecting GRAY, all colors will be converted to gray scale using YIQ (television) conversion.

PS_COMMENTS

(static) If true we will issue comments in the PostScript file that explain the logic of operations. These are useful if you need to edit the file and make changes; otherwise you can set it to false which yields a somewhat slimmer PostScript file [default is false].

PS_CONVERT

Comma-separated list of optional module arguments that we should supply when psconvert is called implicitly under modern mode [A]. Ignored when psconvert is called on the command line explicitly. The option arguments must be listed without their leading option hyphen.

PS_IMAGE_COMPRESS

Determines if PostScript images are compressed using the Run-Length Encoding scheme (rle), Lempel-Ziv-Welch compression (lzw), DEFLATE compression (deflate[,level]), or not at all (none) [default is deflate,5]. When specifying deflate, the compression level (1–9) may optionally be appended.

PS_LINE_CAP

Determines how the ends of a line segment will be drawn. Choose among a butt cap where there is no projection beyond the end of the path, a round cap where a semicircular arc with diameter equal to the line-width is drawn around the end points, and square cap where a half square of size equal to the line-width extends beyond the end of the path [default is butt].

PS_LINE_JOIN

Determines what happens at kinks in line segments. Choose among a miter join where the outer edges of the strokes for the two segments are extended until they meet at an angle (as in a picture frame; if the angle is too acute, a bevel join is used instead, with threshold set by PS_MITER_LIMIT), round join where a circular arc is used to fill in the cracks at the kinks, and bevel join which is a miter join that is cut off so kinks are triangular in shape [default is miter].

PS_MEDIA

Classic mode: Sets the physical size of the current plotting paper [default is a4 (or letter)]. Modern mode: If user selects PostScript output then the above applies as well. For other graphics formats (PDF and rasters), the media size is determined automatically by cropping to fit the plot exactly (but see PS_CONVERT). However, if a specific media size is desired then the PS_MEDIA may be specified as well. The following formats (and their widths and heights in points) are recognized:

Media

width

height

Media

width

height

A0

2380

3368

archA

648

864

A1

1684

2380

archB

864

1296

A2

1190

1684

archC

1296

1728

A3

842

1190

archD

1728

2592

A4

595

842

archE

2592

3456

A5

421

595

flsa

612

936

A6

297

421

halfletter

396

612

A7

210

297

statement

396

612

A8

148

210

note

540

720

A9

105

148

letter

612

792

A10

74

105

legal

612

1008

B0

2836

4008

11x17

792

1224

B1

2004

2836

tabloid

792

1224

B2

1418

2004

ledger

1224

792

B3

1002

1418

B4

709

1002

B5

501

709

For a completely custom format (e.g., for large format plotters) you may also specify WxH, where W and H are in points unless you append a unit to each dimension (c, i, m or p [default is p]). Additional user-specific formats may be saved as separate line in a gmt_custom_media.conf file stored in ~/.gmt. Each record would have a format name followed by width and height of your media in points. For infinitely long paper rolls (e.g., plotters you can set height = 0).

PS_MITER_LIMIT

Sets the threshold angle in degrees (integer in range [0,180]) used for mitered joins only. When the angle between joining line segments is smaller than the threshold the corner will be bevelled instead of mitered. [default is 35]. Setting the threshold angle to 0 implies the PostScript default of about 11 degrees. Setting the threshold angle to 180 causes all joins to be beveled.

PS_PAGE_COLOR

Sets the color of the imaging background, i.e., the paper [default is white].

PS_PAGE_ORIENTATION

(-P) Sets the orientation of the page. Choose portrait or landscape [default is landscape]. Only available in GMT classic mode.

PS_SCALE_X

Global x-scale (> 0) to apply to plot-coordinates before plotting. Normally used to shrink the entire output down to fit a specific height/width [default is 1.0].

PS_SCALE_Y

Global y-scale (> 0) to apply to plot-coordinates before plotting. Normally used to shrink the entire output down to fit a specific height/width [default is 1.0].

PS_TRANSPARENCY

Sets the transparency mode to use when preparing PS for rendering to PDF. Choose from Color, ColorBurn, ColorDodge, Darken, Difference, Exclusion, HardLight, Hue, Lighten, Luminosity, Multiply, Normal, Overlay, Saturation, SoftLight, and Screen [default is Normal].

Calendar/Time Parameters

TIME_EPOCH

Specifies the value of the calendar and clock at the origin (zero point) of relative time units (see TIME_UNIT). It is a string of the form yyyy-mm-ddT[hh:mm:ss] (Gregorian) or yyyy-Www-ddT[hh:mm:ss] (ISO) [default is 1970-01-01T00:00:00 (the origin of the UNIX time epoch)].

TIME_INTERVAL_FRACTION

Determines if partial intervals at the start and end of an axis should be annotated. If the range of the partial interval exceeds the specified fraction of the normal interval stride we will place the annotation centered on the partial interval [default is 0.5].

TIME_IS_INTERVAL

Used when input calendar data should be truncated and adjusted to the middle of the relevant interval. In the following discussion, the unit unit can be one of these time units: (y year, o month, u ISO week, d day, h hour, m minute, and s second). TIME_IS_INTERVAL can have any of the following three values: (1) OFF : no adjustment, time is decoded as given. (2) +nunit : activate interval adjustment for input by truncate to previous whole number of n units and then center time on the following interval. (3) -nunit. Same, but center time on the previous interval [default is off]. For example, with TIME_IS_INTERVAL =+1o, an input data string like 1999-12 will be interpreted to mean 1999-12-15T12:00:00.0 (exactly middle of December), while if TIME_IS_INTERVAL = off then that date is interpreted to mean 1999-12-01T00:00:00.0 (start of December).

TIME_REPORT

Controls if a time-stamp should be issued at start of all progress reports. Choose among clock (absolute time stamp), elapsed (time since start of session), or none [default is none].

TIME_SYSTEM

Shorthand for a combination of TIME_EPOCH and TIME_UNIT, specifying which time epoch the relative time refers to and what the units are. Choose from one of the preset systems below (epoch and units are indicated):

TIME_SYSTEM

TIME_EPOCH

TIME_UNIT

Notes

JD

-4713-11-25T12:00:00

d

Julian Date

MJD

1858-11-17T00:00:00

d

Modified Julian Date

J2000

2000-01-01T12:00:00

d

Astronomical time

S1985

1985-01-01T00:00:00

s

Altimetric time

UNIX

1970-01-01T00:00:00

s

UNIX time

RD0001

0001-01-01T00:00:00

s

RATA

0000-12-31T00:00:00

d

This parameter is not stored in the gmt.conf file but is translated to the respective values of TIME_EPOCH and TIME_UNIT.

TIME_UNIT

Specifies the units of relative time data since epoch (see TIME_EPOCH). Choose y (year - assumes all years are 365.2425 days), o (month - assumes all months are of equal length y/12), ww (week) d (day), h (hour), m (minute), or s (second) [default is s].

TIME_WEEK_START

When weeks are indicated on time axes, this parameter determines the first day of the week for Gregorian calendars. (The ISO weekly calendar always begins weeks with Monday.) [default is Monday (or Sunday)].

TIME_Y2K_OFFSET_YEAR

When 2-digit years are used to represent 4-digit years (see various FORMAT_DATEs), TIME_Y2K_OFFSET_YEAR gives the first year in a 100-year sequence. For example, if TIME_Y2K_OFFSET_YEAR is 1729, then numbers 29 through 99 correspond to 1729 through 1799, while numbers 00 through 28 correspond to 1800 through 1828. [default is 1950].

See Also

gmt, gmtdefaults, gmtcolors, gmtget, gmtset